High-Tech Chargers

High-Tech Chargers - Desktop With Refresh Function

Energy 16 Plus 1001-0004-US

Charging and maintenance device for 1-12 AAA or AA, 1-2 9V NiMH rechargeable batteries, automatic refreshing function, plus 2 USB charging sockets.

  • Suitable for NiMH/NiCd rechargeable batteries

  • Capacity quick test of the inserted cells for approx. 10 seconds

  • LED green: capacity over 80% of the nominal capacity

  • LED orange: capacity between 25-80% of the nominal capacity

  • LED red: capacity under 25% of the nominal capacity

  • Auto-diagnosis of the inserted cells with automatic start of a pre- charging and/or refreshing process, if required

Additional Features

The Energy 16 plus also boast two 5V, 1 Amp USB charging ports compatible with, iPhone, iPad, Blackberry and other 5V USB electronics. Another great thing is the smaller, "sleeker" design which takes up less counter space.

But probably the best feature can't been seen by the naked eye. The Energy 16 plus contains added circuitry for maximizing the rejuvenation of your cells, including a pre-charge cycle, which brings badly worn batteries up to a suitable voltage before recharging. And, of course the proprietary Ansmann refresh cycle is still resident in this new version with a few tweaks to fine-tune the chemistry of your batteries.

Specifications:

  • Input voltage: 100-240V AC / 50-60Hz

  • Charging time for AA @ 2850mAh: 2.4h

  • Charging currents:

                    D: 6x 1000mA
                    C: 6x 1000mA
                    AA: 12x 1000mA
                   AAA: 12x 400mA
                   9V E-Block: 2x 60mA
                   USB: 2x 1000mA

Energy 8 Plus 5207442/US

Charging and maintenance device for 1-6 AAA /AA, and 1-2 9V E-Block rechargeable batteries, automatic refreshing function

  • Suitable for NiMH/NiCd rechargeable batteries

  • Capacity quick test of the inserted cells for approx. 5 seconds Auto-diagnosis of the inserted cells with automatic start of a refreshing process and/or pre-charging process, if required

  • Microprocessor controlled charging

  • Five-way over charging protection

  • Individual supervision of each cell position

  • Battery status of each charging slot is displayed by an LED

  • Faulty cell detection

  • Alkaline battery detection

  • Trickle charge

  • Revere polarity protection

  • For worldwide use

  • 3 years warranty

Specifications:

  • Input voltage: 100-240V AC 50-60Hz

  • Charging time for Mignon AA 2850mAh: 2.4h

  • Charging currents:

  • 1000mA for AA, C and D cells,

  • 400mA for Micro AAA cells

  • 60mA for 9V E-Blocks